FRP-NC
is a non-CFC semi-permanent polymer release coating ideally suited for
molding reinforced plastic and cultured marble parts. It is a unique
release interface, specifically formulated for polyester resins, which
chemically bonds to mold surfaces forming a micro-thin release film. Mold Surface Temp. Range: 60
- 105 deg. F Curing Time: 15 - 20 mins.
after final coat Benefits: Multiple release,
High-gloss parts, Reduced labor costs, No chlorinated solvents, Eliminates
cleaning and buffing. Available Sizes: Pint
cans; 1 gal. cans; 5 gal. pails; 55 gal. drums
700-NC watkins product code:
700-NC
is a non-CFC, semi-permanent, multiple release polymer resin which effectively
releases all polymer resins. Versatile agent that provides slip where
mold geometry problems are encountered. It cures at room temperature
to give a high-gloss finish to molded parts. Mold Surface Temp. Range: Up
to 275 deg. F Curing Time: 15 - 20 mins.
after final coat @ room temperature Benefits: Superior multiple
release performance, High slip and high gloss, No chlorinated solvents,
Versatile: releases most polymers. Available Sizes: Pint
cans; 1 gal. cans; 5 gal. pails; Aerosol cans; 55 gal. drum
770-NC watkins product code:
770-NC
is a non-CFC, semi-permanent, multiple release polymer resin which effectively
releases epoxies, polyesters, and all other common thermosetting resins.
Dries and cures very rapidly at room temperature to give a high-slip
film capable of maximum release performance. Mold Surface Temp. Range: 60
- 140 deg. F Curing Time: 5 - 10 mins.
after final coat at 80 deg. Benefits: Fast-dry, Fast cure,
High gloss and high slip, Versatile: releases most polymers, No mold
build-up, Reduced odor. Available Sizes: Pint
cans; 1 gal. cans; 5 gal. pails; 55 gal. drum
SOLO watkins product code:
SOLO
is a unique patented formulation designed to release all fiberglass reinforced
and filled polyester composites. Application and use of a release agent
has never been easier or faster, simply Spray On and Leave On. No wiping,
polishing or buffing is required. The resulting polymer film retains
the original gloss of the mold and is capable of providing multiple releases. Mold Surface Temp. Range: 60
- 105 deg. F Curing Time: 30 mins. Benefits: Fast, easy application,
No polishing required, Maximum mold utilization, Retains high gloss finish,
Minimal mold build-up, Significantly lower mold maintenance costs. Available Sizes: 1
gal. cans; 5 gal. pails; 55 gal. drum
WOLO watkins product code:
WOLO
is a unique polymer release agent that cures quickly and provides multiple
release of all polyester resins. Application and use of a release agent
has never been easier, simply wipe it on and let it evaporate to produce
a high gloss finish with no need to polish. Mold Surface Temp. Range: 60
- 105 deg. F Curing Time: 15 mins. after
final coat at room temperature Benefits: High gloss finish,
easy application, fast curing, multiple releases, minimal mold build-up,
Ability to use "WypAll" or equivalent wiping cloths. Available Sizes: Pint
cans; 1 gal. cans; 5 gal. pails; 55 gal. drum
FMS watkins product code:
FMS
is a fiberglass mold sealer for fiberglass reinforced polyester, epoxy,
and other resin-type molds. Use to seal new molds and older molds with
micro-porosity and slight surface imperfections. An excellent base coat
enhancing the release advantages of all Frekote products. Recommended
as a base coat with other Frekote Cultured Marble and Reinforced Fiberglass
Release Agents. Mold Surface Temp. Range: 60
- 140 deg. F Curing Time: 15 - 20 mins.
after final coat Benefits: No CFC's or chlorinated
solvents, Effectively seals green molds, Easy to apply. Available Sizes: Pint
cans; 1 gal. cans; 5 gal. pails
FREWAX watkins product code:
Frewax
is an all new polymer release agent that combines the benefits of an
easy-to-use wax with the multiple release performance of a polymer resin.
Frewax provides more consistency with less streaking and mold maintenance.
Buff on and buff off, just like a wax. Mold Surface Temp. Range: 60
- 95 deg. F Curing Time: 5 - 10 mins.
before polishing Benefits: High-gloss finish,
Minimum mold build-up, No cleaning, Visible form of Polymer Release Agent. Available Sizes: Pint
cans; 1 gal. cans
PMC watkins product code:
PMC
(polyester mold cleaner) is a special blend of solvents that dissolves
and removes wax from polyester molds without dulling the surface. Also
use to clean epoxy, metal mold surfaces, brushes, and equipment. Highly
recommended prior to application of FMS and Frekote mold release agents. Mold Surface Temp. Range: Up
to 110 deg. F Curing Time: N/A Benefits: Easy to use, Fast
acting, Eliminates contaminants, Enhances multiple release effectiveness,
Removes free styrene which reduces release performance. Available Sizes: 1
gal. cans; 5 gal. pails; 55 gal. drum
