FRP-NC watkins product code: FRFRPNC

FRP-NC is a non-CFC semi-permanent polymer release coating ideally suited for releasing reinforced fiberglass parts such as boat hulls. It is a unique release interface, specifically formulated for polyester resins, which chemically bonds to mold surfaces forming a micro-thin release film. Mold Surface Temp. Range: 60 - 105 deg. F Curing Time: 15 - 20 mins. after final coat Benefits: Multiple release, High-gloss parts, Reduced labor costs, No chlorinated solvents, Eliminates cleaning and buffing. Available Sizes: Pint cans; 1 gal. cans; 5 gal. pails; 55 gal. drums

SOLO watkins product code:

SOLO is a unique patented formulation designed to release all fiberglass reinforced and filled polyester composites. Application and use of a release agent has never been easier or faster, simply Spray On and Leave On. No wiping, polishing or buffing is required. The resulting polymer film retains the original gloss of the mold and is capable of providing multiple releases. Mold Surface Temp. Range: 60 - 105 deg. F Curing Time: 30 mins. Benefits: Fast, easy application, No polishing required, Maximum mold utilization, Retains high gloss finish, Minimal mold build-up, Significantly lower mold maintenance costs Available Sizes: 1 gal. cans; 5 gal. pails; 55 gal. drums

WOLO watkins product code:

WOLO is a unique polymer release agent that cures quickly and provides multiple release of all polyester resins. Application and use of a release agent has never been easier, simply wipe it on and let it evaporate to produce a high gloss finish with no need to polish. Mold Surface Temp. Range: 60 - 105 deg. F Curing Time: 15 mins. after final coat at room temperature Benefits: High gloss finish, easy application, fast curing, multiple releases, minimal mold build-up, Ability to use "WypAll" or equivalent wiping cloths. Available Sizes: Pint cans; 1 gal. cans; 5 gal. pails; 55 gal. drum

44-NC watkins product code:

44-NC is a high performance polymer product ideally suited for releasing parts where a matte finish is preferred. Mold Surface Temp. Range: 60 - 140 deg. F Curing Time: 10 - 15 mins. after final coat Benefits: Multiple release, Matte finish, No build-up, No transfer of release agent to part. Available Sizes: Pint cans; 1 gal. cans; 5 gal. pails; 55 gal. drum

FMS watkins product code:

FMS is a fiberglass mold sealer for fiberglass reinforced polyester, epoxy, and other resin-type molds. Use to seal new molds and older molds with micro-porosity and slight surface imperfections. An excellent base coat enhancing the release advantages of all Frekote products. Recommended as a base coat with other Frekote Boat Building Release Agents. Mold Surface Temp. Range: 60 - 140 deg. F Curing Time: 15 - 20 mins. after final coat Benefits: No CFC's or chlorinated solvents, Effectively seals green molds, Easy to apply. Available Sizes: Pint cans; 1 gal. cans; 5 gal. pails

FREWAX watkins product code:

Frewax is an all new polymer release agent that combines the benefits of an easy-to-use wax with the multiple release performance of a polymer resin. Frewax provides more consistency with less streaking and mold maintenance. Buff on and buff off, just like a wax. Mold Surface Temp. Range: 60 - 95 deg. F Curing Time: 5 - 10 mins. before polishing Benefits: High-gloss finish, Minimum mold build-up, No cleaning, Visible form of Polymer Release Agent. Available Sizes: Pint cans; 1 gal. cans

PMC watkins product code:

PMC (polyester mold cleaner) is a special blend of solvents that dissolves and removes wax from polyester molds without dulling the surface. Also use to clean epoxy, metal mold surfaces, brushes, and equipment. Highly recommended prior to application of FMS and Frekote mold release agents. Mold Surface Temp. Range: Up to 110 deg. F Curing Time: N/A Benefits: Easy to use, Fast acting, Eliminates contaminants, Enhances multiple release effectiveness, Removes free styrene which reduces release performance. Available Sizes: 1 gal. cans; 5 gal. pails; 55 gal. drum

Home
Search This Site
Adhesives -- Release Agents -- Sealants
Watkins & Associates, Inc 5395 Webb Parkway Lilburn GA 30047 Phone 770.279.9200 Fax 770.279.9203 Toll free 800.279.2701
Legal Information